When you’re a professional individual who works in the corporate world, or you’re trying to look presentable and dapper for a night out, the iron is an invaluable resource that you have your disposal. There’s something about an ironed pair of trousers or a shirt which lends professionalism and a good standard to your look, and it is something a lot of people use on a daily basis. When it goes wrong, however, it can be a real pain to try and put right. To seek to aid with this problem, we’re taking a look at some of the common problems that iron can develop, and how you can fix them.
A broken power cord and thermostat
If you’re using your iron on a very consistent basis, then it will come as no surprise that the power cords and the thermostat will be among the first things to stop working. To replace the power cord, you need to unplug the device before you do anything else to avoid accident and injury. Once you’ve removed the plug from the wall, the next step you need to take is to remove the cover panel on the iron to get a look at the inner wirings and design. Now that you’ve removed the cover, you should also remove any screws which hold the cord in place. If that’s done, locate the wire nuts that connect the power cord to the wires inside the iron, remove them, and then you can take the old power cord and throw it away. All you need to do from there is install a new cable by unscrewing everything you unscrewed, so it looks the same as when you found it. If you’re unsure, take a photo just before you start unscrewing things, so you have something to compare to.
A dirty soleplate
This is something which can interfere with the function and usefulness of the entire iron, so you should make sure this is cleaned and maintained on a regular basis. To do that, you should unplug the device, and then use a damp cloth to clean the plate. Obviously, you don’t want the clamp to be dripping wet. Otherwise, you risk getting water into the electrical appliances and damaging them. In some cases, you need to use salt or even vinegar to break down stains, but it is better to apply this directly to the cloth and be very careful with it, than to drip any liquids onto the plate.
Overall, these are some of the common problems that are faced by people who have an iron which they use with frequency. You need to make sure that the metal is always clean, and that the power cord is not damaged due to overheating. Otherwise, you can run the risk of a fire hazard and a dangerous appliance. Regular maintenance of your device will help to keep it in good condition, and also ensure that you get a longer lifespan from it.
Does the above sound like something you could do, if so, get in contact with this Phoenix appliance repair who posted this job.